Easy Transfer of Patterns to Wood

 

IMG_1464This is an easy way to transfer cutting patterns to wood. Instead of using carbon paper, use something you may already have in your house, Glad Press’n Seal plastic wrap. I think this was a reader tip in Wood Magazine. I filed it away in my brain for future use. I used it when building a Funny Birdhouse.

Take a piece of Press’n Seal and smooth it down on to a dust free drawing or picture you want to transfer. Make sure the sticky side is down. ┬áIf the print on the film is readable you have it right. Really smooth it down using some pressure so it sticks. Now using a Sharpie, trace the pattern. When you are done peel it off.

Transfer it to the wood. Make sure the wood dust free so the film will stick. Smooth it downIMG_1463 using pressure. Work from the centre out. The film has a texture to it that acts like suction cups. When you have it down, cut off the excess with a razor knife.

Using a scroll saw or band saw cut out the pattern. I haven’t tried a jig saw. The film sticks well, but I don’t know if dragging the base of a jig saw across it would peel it off.

Don’t forget to peel of the film before gluing up. Like I almost did.

IMG_1448Birdhouse