Easy Transfer of Patterns to Wood

 

IMG_1464This is an easy way to transfer cutting patterns to wood. Instead of using carbon paper, use something you may already have in your house, Glad Press’n Seal plastic wrap. I think this was a reader tip in Wood Magazine. I filed it away in my brain for future use. I used it when building a Funny Birdhouse.

Take a piece of Press’n Seal and smooth it down on to a dust free drawing or picture you want to transfer. Make sure the sticky side is down.  If the print on the film is readable you have it right. Really smooth it down using some pressure so it sticks. Now using a Sharpie, trace the pattern. When you are done peel it off.

Transfer it to the wood. Make sure the wood dust free so the film will stick. Smooth it downIMG_1463 using pressure. Work from the centre out. The film has a texture to it that acts like suction cups. When you have it down, cut off the excess with a razor knife.

Using a scroll saw or band saw cut out the pattern. I haven’t tried a jig saw. The film sticks well, but I don’t know if dragging the base of a jig saw across it would peel it off.

Don’t forget to peel of the film before gluing up. Like I almost did.

IMG_1448Birdhouse