Review Campbell Hausfeld Air Hose Reel

CH Hose Reel

I purchased the Campbell Hausfeld PA500400AV  Retractable Air Hose Reel recently, and am quite pleased with it. This air hose reel review is what I have experienced. It comes with 50 feet of 3/8″ air hose on an enclosed reel. The hose feeds out and retracts smoothly. That is important to me. I have been using a regular hose for years and cursed it every time. Unless you twisted it to get the curl out, it would not lie flat. It was a hassle every time. This hose is a breeze to use. I can pull it out to my driveway. Hold on to the hose when it retracts though!

After using it for some time just sitting by the compressor, I finally mounted it on the wall. It does have a handle on top for portability, but it is better mounted to a wall. It does come with several lag bolts. Remove the bracket from the reel and bolt it down then reattach the reel.

IMG_1468It can swivel side to side. Sticks out from the wall 20″, 15″ tall and 8″ thick. I read an online review that they were concerned it does not have hose guides on the sides, just on the bottom. I don’t think this is a problem as it pivots in the direction being pulled.

IMG_1472I was concerned that it would not be able to provide the volume of air necessary for the impact wrench I use to remove lug nuts on my car. It had to be 3/8″, but I could not find the hose diameter anywhere. Even on the Campbell Hausfeld website.  From the pictures it looked smaller and it was not available in a “brick and mortar” store to look at. So I took a chance and it turned out to be 3/8″. Runs my air tools fine.  You can get it at Amazon  through  this link Air Hose Reel .

After mounting it to the wall I attached it to my compressor through a regulator/moisture filter. In the past I have had problems with the cheap regulators that attach directly to the compressor, so I got a better one, but it didn’t come with a bracket. I made a little holder for it and some accessories with 2 pieces of 1/2″ plywood. Coated it in polyurethane. The regulator just sets in it and seems stable since there is no stress on it.

So after getting everything mounted I am quite happy with my setup and no more cursing. At least at the hose.

air accessories

 

air accessories 2


Leave a Reply